Travertine Pavers Cost in Australia: 2026 Prices

Travertine pavers cost around $60 to $130 per square metre supply-only in Australia. A fully installed job, including base prep and sealing, generally runs $180 to $320 per square metre. Grade, thickness, finish and site prep all affect the final price.

This guide breaks down what you’ll actually pay, compares the main cost components, and shows you what to look for before accepting a quote.

How Much Do Travertine Pavers Cost in Australia?

Supply-only travertine pavers cost around $60 to $130 per square metre in Australia, while installed projects range from $180 to $320 per square metre. 

Standard, filled-and-honed travertine sits at the lower end, while premium-grade stone, feature edging and additional preparation can push the price higher.

As a rough example only, a 40m² patio in supply-only stone at the low end would cost around $2,400. At the upper end of the installed range, the same patio could reach around $12,800. Treat these as ballpark figures, since your own price depends on the factors below.

Disclaimer: Prices in this guide are general information only and may vary by supplier, region and project. Always confirm current pricing with a supplier before budgeting.

How Much Does Travertine Paving Cost by Project Type?

Cost varies by application, since pools, driveways and patios each require different thicknesses, finishes and installation approaches.

Travertine Pool Pavers Cost

Pool paving usually costs $180 to $280 per square metre installed, covering the paver, a slip-rated finish, and coping around the pool edge. Slip performance depends on the actual product, not the finish name, so check the slip-rating spec sheet rather than assuming that any tumbled or honed stone performs the same way. 

Coping is often priced separately, since it needs a bullnose or drop-face edge profile, and curved coping costs more due to the extra cutting. Parto Stone’s pool pavers range includes matching coping options.

Travertine Driveway Pavers Cost

Driveways need a thicker, load-rated slab, usually 40mm to 60mm, plus a stronger base to handle vehicle weight. Expect pricing toward the upper end of the range, since driveway base prep is more involved than a patio needs.

Travertine Patio Pavers Cost

Patios sit mid-range, using standard-thickness stone on a simpler compacted base. A stack-bond layout on a level site is the most budget-friendly option. A mixed-size layout, feature border or awkward angles cost more once labour is factored in.

Paver Layouts and Installation Cost

A simple stack-bond or running-bond layout is the fastest and cheapest to lay, since the pieces are one size and repeat in straight lines. 

A multi-size layout costs more to install, since it takes longer to plan, produces more offcuts, and needs an experienced installer to keep the joints even. 

A common workaround for a tighter budget is a detailed layout in a small feature zone, with a simple layout elsewhere.

What Factors Affect Travertine Paver Prices?

Travertine paver prices are shaped mainly by grade, thickness, finish, layout and site prep.

Stone Grade

Commercial grade sits at the lower end and may have greater colour variation. Standard, or “A” grade, offers reasonable consistency and covers most jobs well. 

Premium grade is the most uniform and usually reserved for feature areas. Parto Stone stocks travertine across silver, cream and ivory ranges, so it’s easy to compare grades and tones side by side.

Thickness

Thinner pavers, around 30mm or 40mm, may suit pedestrian areas, while thicker products, usually 50mm or 60mm, suit higher loads such as driveways. Thicker stone requires more material and cutting time, which is reflected in the price.

Finish

Honed, tumbled, brushed and sandblasted finishes each carry a slightly different price. Tumbled edges usually cost a little more due to the extra processing. Polished finishes are generally less suited to outdoor areas where slip performance matters.

Layout

A simple stack-bond layout, where every paver is the same size, is the cheapest and fastest to install. A multi-size layout takes longer to plan and install, since the installer has to stagger joints and make more cuts.

Site Preparation

This is one of the biggest variables in an installed price. Excavation, base type and drainage work add a modest amount on a flat site, but can climb well above the paving cost on a sloped block or a driveway needing a reinforced base.

Delivery and Quantity

Freight to regional areas, or a larger order needing multiple truckloads, can add a few hundred dollars on top. Buying in bulk often brings the per-square-metre cost down.

Ongoing sealing costs are easy to forget. Travertine is porous, so it needs resealing every couple of years, and it’s worth budgeting for that from the start.

How Much Does Travertine Paving Cost in Perth?

Travertine paving costs in Perth vary based on local labour rates, delivery distances, site access and the product chosen. There’s no single “Perth price”; the same factors that drive cost anywhere in Australia apply here too.

Perth has a decent spread of suppliers, from large hardware chains to specialists who import directly from quarries. Buying direct from a specialist, such as Parto Stone’s Osborne Park showroom, often means better access to bulk pricing and custom cutting.

Travertine Pavers vs Other Paving Materials

Travertine generally costs more than concrete and can sit in a similar or higher range than porcelain or other natural stone, depending on the specific product and finish.

Concrete is cheapest upfront but fades faster over time. Porcelain resists staining well but costs more to install. Travertine sits between the two, and its appeal is the natural colour variation a manufactured paver can’t replicate.

Supply-Only vs Installed Travertine Pavers

Always check which one you’re being quoted, since the terms are often used loosely. 

A low supply-only price can still turn into an expensive finished job once labour and prep are added, so ask the supplier to spell out what their number includes.

How to Get an Accurate Travertine Paving Quote

Compare like-for-like: the same thickness, grade, finish and layout, with GST, delivery and wastage stated. Before accepting a figure, ask three things: is this price supply-only or installed, does it include base prep, and is sealing quoted separately?

Measure your area and add a wastage allowance of 5 to 10%, since offcuts are normal on any paving job. A supplier who itemises these costs is usually easier to budget against.

Is Travertine Worth the Cost?

Travertine tends to be worth the higher upfront cost when its natural look and comfort underfoot matter more to you than the lowest price.

It offers genuine colour variation, a range of finishes, and a surface that stays comfortable underfoot around pools. On the other side, it costs more than concrete, needs periodic resealing, and requires correct installation to avoid uneven joints or drainage problems. 

For patios and pool surrounds, the trade-off can make sense for buyers who value natural stone and are comfortable with the extra maintenance.

How to Choose Travertine Pavers for Your Budget

Set a realistic per-square-metre target for your project, then work backwards from there rather than picking a stone first and hoping it fits.

• Decide on supply-only or installed pricing before comparing quotes.
• Match the grade to how visible the area is; save premium grade for feature zones.
• Choose a simple layout if budget is the priority.
• Ask each supplier to itemise GST, delivery and wastage allowance.
• Factor in resealing costs over the first few years, not just installation.

Get Travertine Pavers from Parto Stone

Parto Stone offers travertine pavers for Perth projects in a range of colours, finishes and formats, alongside tiles and cladding. 

If you’re comparing travertine pavers in Perth and want a clear, upfront number rather than a vague estimate, Parto Stone can walk you through the full product range and provide pricing based on your exact area, grade and finish.

Request a quote for current availability and pricing.

FAQs

Are travertine pavers more expensive than concrete? 

Yes. Travertine is a quarried natural stone rather than a manufactured product, which adds sourcing, cutting and freight costs. Concrete pavers usually cost $45 to $70 per square metre supply-only, against $60 to $130 for travertine.

Are travertine pavers good around pools? 

Yes. A finish chosen for slip performance stays comfortable underfoot around water. Check the specific product’s slip rating rather than assuming any tumbled or honed stone performs the same way.

Do travertine pavers need sealing? 

Yes. Travertine is porous, so it needs sealing after installation and resealing every couple of years to protect against water and staining.